Want to Take Precautions While Towing Your Car? You Need to Read This!

Share

Are you moving somewhere far away and need to take your car with you?

Has your car broken down in the middle of the road?

Or taking your car on a long trip?

Sure, any or all of the above scenarios can pose an inconvenience. 

BUT the real struggle is finding the right towing services near you that is prompt, efficient, available 24/7, and will treat your car right.

And most importantly, you need to ensure that you’re able to contact them whenever you need them.

This is an easy-to-follow guide to make sure the towing process is comfortable and safe for you and your car.

Let’s take a quick look at the towing methods different types of towing trucks use to tow vehicles.

3 Different Types of Towing Methods

1. Using a Tow Dolly

It allows you to tow a vehicle while taking some load off the towing vehicle.

It is accomplished by allowing the rear wheels to rest on the road while towing the vehicle.

However, this tow truck is great for towing front wheel drive since a rear wheel drive requires you to disconnect the whole drive shaft, in case you are traveling long distances.

#ProTip
The vehicle used to tow cars must weight at least 750 pounds more than the car it is pulling, and as well as the towing appliance. 

Ensure you do not exceed the towing capacity as well.

4 Steps to Use Tow Dolly Perfectly

Step 1

Connect tow dolly. Attach the coupler to hitch ball on the towing vehicle.

Make sure it’s tight and secure.

Also, ensure the coupler is securely fastened by slightly moving the vehicle and dolly in the opposite direction.

Now attach the chains from dolly to towing vehicle.

This is to make sure that the dolly stays attached to the car even if the coupler comes off the hitch ball.

Step 2

Load the towed vehicle. Drive the car onto the dolly ramp facing forward.

Warning, Alert!

If you face the vehicle towards the rear, then it can cause the towed vehicle to sway out of direction. 

So always ensure that the width fits the ramp. Also, check for other parts while loading.

Step 3

Now secure the towed vehicle.  

Drive onto the dolly until both front tires are firmly gripped against the wheel stops.

Use the tire straps and lock them with the front tires.

Keep the chains away from fuel and brake lines to stay away from danger from these components.

Step 4

Disconnect the driveshaft. 

Then go underneath the towed vehicle to locate the driveshaft connecting to the differential.

Having found the connection point of the driveshaft and differential, look for the U-joint which holds the driveshaft to the differential component.

Secure the driveshaft to the undercarriage using a strap cord or any other alternative. Make sure it is secured to a frame and not the exhaust pipes.

Exit the four bolts at U-joint. Now, push the driveshaft up, adjusting the strap cord as needed.

Get the bolts back in the yoke on the differential component. 

Repeat the same steps for another axle.

Call the expert if you are not confident in performing it yourself.

#Important

Always follow all the local laws, as well as the laws of any other states you plan on traveling through when towing your vehicle. 

This also includes the appropriate towing lights and mirrors.

2. Using a Trailer 

Required: Nylon straps or wheel nets

Using a trailer has its advantages and disadvantages. To talk about its downside, yes it’s got one that the towed vehicle and trailer together might be massive for the towing vehicle to handle.

#Warning

It is mandatory that you know the tow rating of the tow vehicle. It should be rated to haul the weight of the car and trailer as well.

3 Steps to Use a Trailer Correctly

Step 1
  • Connect the trailer by securely attaching the trailer to the hitch ball of the towing vehicle.
  • Move the vehicle slightly forward as you would do when using a tow dolly. 
  • So, check the trailer coupler is securely connected to the hitch.
  • Connect the safety chains from the trailer to the towing vehicle.
  • Attach the trailer wiring to the towing vehicle’s socket.
Step 2
  • Ramp the vehicle.
  • Extend the trailer ramps and drive the towed vehicle onto the trailer.
  • Maintain the center point and drive it slowly upwards.
  • Place the vehicle in parking gear and set the brakes.
Step 3
  • The last step includes securing the vehicle to the trailer.
  • Use straps or nets, position them over the center of the front tires. 
  • Ratchet the strap down until they are tight and secured.

3. Using Tow Bar

Towbars are used to make all four wheels of the towed vehicle rest on the ground even when moving. 

Using a tow bar needs you to detach the driveshaft to keep them from damaging the transmission.

#SafetyWarning
In this method, you need to connect brackets to the front frame of the towed vehicle. If you are unable to perform it yourself, then you can call in an expert to do it for you.

3 Steps to Use Tow Bar Properly

Step 1
  • Secure the bracket frame. Use the tow bar as a guide, and find a firm part of the vehicle frame to connect the bracket on each side of the front of the towed vehicle.
  • It will require you to drill into the frame component of your vehicle.
  • Here you are looking at two brackets which can be attached and detached to the tow bar instantly.
Step 2
  • Check the brake lights. Do they work?
  • Make sure they are left untouched in the whole process.
  • If you don't plan on towing the vehicle very often, then you can use removable tail lights.
Step 3

Here you need to connect the tow bar to the towing vehicle.

  • Start by attaching the tow bar bracket to the towed vehicle. 
  • You can do that by sliding the bolts through both ends of the tow bar that connect to the brackets.
  • Secure the bolts using washers and nuts that relate to the bolt size. 
  • Use a ratchet wrench to tighten.
  • Connect the two tow bars coming from the bracket end on the towed vehicle to the pivot brackets using the bolt, nut, and washers that are with the tow bar.
  • Secure the tow bar by attaching chains from the towed vehicle to pivot bracket from the base plate to the towed vehicle.

By using any one of these methods, you’ll be able to securely tow your vehicle and are ready to hit the road with no fear. 

For professional guidance, you can always contact the best towing service provider in Doylestown, A&G Customs.

They provide 24/7 towing services whenever you call them, with the highest standards set in the towing services offered anywhere.