Why Is It Essential To Inspect Your Vehicle By Timely Inspection?


Maintaining your vehicle seems daunting at first. It's a lot like taking care of any other machine- except this one goes everywhere with you and has so many parts! 

Focus on the basics and inspect your vehicle daily to avoid frequent car repairs in Doylestown. Remember that every part becomes dirty over time, and paying attention to how often those fluids are exchanged or drained, then do whatever is necessary before the next service visit.

In this post, you can find helpful tips to inspect your car effectively.

6 Ways You Can Inspect Your Vehicle

1) Regularly Check Your Tire’s Tread Depth

Tires come in many shapes and sizes. The type of tread varies depending on what you want to use it for. Most tires now also have wear lines that cross at an angle perpendicular to each groove's depths- this helps provide more grip so your tire can last longer. Once the tread has worn down so that it is even with the lines of wear, you need to replace your tires.

Another way to test your tire's wear is by pressing an upside-down penny into the groove between treads. If you can see Abraham Lincoln's entire head, then it means these tires are too worn and need replacement soon.

Driving on tires with worn-out treads can blow out a tire or lose traction in the rain. This creates an unsafe driving environment, not only for you but also for other drivers on the road.

2) Ensure Proper Inflation Of Tires

It's crucial to maintain the proper air pressure in your tires. Driving on underinflated or overinflated tires can do damage. It will affect your driving conditions, such as ride quality, for safety reasons too. Therefore, it's essential to ensure your tires are adequately inflated. 

Check for maximum air pressure ratings and fill them with an appropriate amount until it matches what's written near their valves, or use a tire gauge before placing it over the top while checking, which will tell us whether they need more gas.

Under-inflated tires can also reduce your gas mileage. This is because the vehicle works harder to propel you on soft, under-inflated rubber. This results in less efficiency than if the tire is properly inflated. Over-inflated tires are a dangerous combination that can lead to blowouts and even shorter tire lives.

What Are The Car Safety Features Protecting You In a Collision?

3) Inspect For Signs Of Damage In Serpentine Or Accessory Belts

Your engine is the powerhouse that drives all its accessories, including a belt-driven power steering pump, air conditioning unit, and alternator. If it rubs against something inside your car's bayonet, you may have trouble with these belts wearing out sooner than expected. 

Inspect these belts for cracking, rubbing, or other damage. If you notice any abnormalities on the belt surface, contact a professional for auto repair in Doylestown immediately to replace it at once!

If your engine is equipped with a timing belt, it could cause significant damage if it breaks. If you notice signs of rubbing, take a minute to move what was rubbing it when replacing the belt, so that doesn’t happen again.

4) Regularly Check Oil Level

To check your oil, locate the dipstick in your vehicle. The top of a yellow-colored one is often easily identified. However, if you have trouble finding it, then refer to the owner’s manual for guidance on it. Next, take out the dipstick and wipe off any oil on it. Look at both sides to quickly identify the line, then slide it back into place. Be sure to check how high up this level reaches before replacing it with fresh fuel.

When you see a dipstick with multiple lines on it, the top one represents “full,” and each line below shows how much oil you require for your car.

You should always check your oil levels and top off any leaks. If you notice an issue with burning or leaking, stop by the nearest auto store for new filters.

5) Check The Right Level Of Brake Fluids & Coolant

You'll find a coolant and brake fluid reservoir under the hood, but these plastic containers have lines that represent how much of each should be inside. If both the liquids are below the full line, you should top them off to ensure your vehicle never runs without either. Again, refer to your owner’s manual to identify which reservoirs need replacing and what fluid needs to go in per manufacturer recommendations.

The coolant travels through your engine to help regulate its temperature.

Brake fluid helps you stop your car when you press on the pedal, but ensure that the fluid levels are optimum. A low level could cause a failure or erratic braking behavior, challenging to manage in an emergency.

6) Check Your Headlight, Turn Signals & Tail Light

Your headlights serve a crucial role in helping you navigate at night, and your tail lights & turn signals ensure other drivers understand where you want to go. All the lights on your car must be working correctly. Ask a friend to stand outside and make sure they flash in sequence as you test each one of them.

Replace the lights if it's not working correctly to ensure adequate performance.

If you're noticing that one of your turn signals is flashing more than usual, it might be because the other end has blown and needs replacing.

Bottom Line

A regular inspection is essential to identify any problems you may have missed from the previous inspection. For example, check the tire tread depth, ensure your tires are properly inflated, and look for signs of damage in serpentine or accessory belts. 

Of course, there are many other things you need to check. However, these essential items can go a long way. By practicing these steps, you can effectively reduce the chances of expensive car repair in Doylestown, and your vehicle will be in better condition. 

A&G Customs is the one-stop-shop for all your auto repair needs. Whether you need a quick inspection or something more serious, they have it covered! Additionally, their prices are fair and reasonable, so don't wait to see them today before someone else does.